Leica Q2 Reporter
Das Wesentliche
Dunkelgrün matt lackiert
Ohne Leica Logo auf der Frontseite
47,3 MP CMOS Vollformatsensor
Hochauflösender OLED-Sucher (3,68 Megapixel)
28mm Festbrennweite (Leica Summilux1:1,7/28mm ASPH.)
4K Video
Schneller Autofokus
Staub- und Spritzwassergeschützt (IP52**)
Made in Germany
Die Leica Q2 Reporter steht in einer langen Tradition speziell entwickelter Kameras, die für die rauen Einsatzbedingungen von Reportage- und Pressefotografen ausgelegt sind. Das Gehäuse ist mit einer Armierung bezogen, das besonders widerstandsfähig und griffig ist. Das Gewebe besteht aus einer Kunstfaser, die auch für die Herstellung von Schutzausrüstung genutzt wird. Das nach dem Gebrauch auftretende Aufstellen der Fasern erhöht die Griffigkeit und sorgt für eine unverkennbare Optik. Kombiniert wird dieser verbesserte Schutz mit einer diskreteren Gestaltung und einer speziellen Lackierung in mattem Dunkelgrün, die besonders kratz- und abriebfest ist.
**International Protection, Schutzart 52: Geschützt gegen Staub in schädigender Menge. Schutz gegen fallendes Tropfwasser, wenn das Gehäuse bis zu 15° geneigt ist.
Leica Q2 Reporter, Leder Trageriemen, Akku, Gegenlichtblende, Objektiv-Vorderdeckel, Blitzschuhabdeckung, Ladegerät und Kabel, Kurzanleitung
Marke: Leica
Firmenname: Leica Camera AG
Adresse: Am Leitz-Park 5
Land: Germany
Postleitzahl: 35578
Stadt: Wetzlar
Verantwortliche Person: Leica Produkt Support
E-Mail-Adresse: info@leica-camera.com
Telefonnummer: +49 6441 2080 111
SAFETY REMARKS General Information
- Do not use your camera in the immediate vicinity of devices that generate powerful magnetic, electrostatic or electromagnetic fields (e.g., induction ovens, microwave ovens, television sets or computer screens, video game consoles, cell phones, broadcasting equipment). Their electromagnetic fields can interfere with image recordings.
- Strong magnetic fields, e.g., from speakers or large electric motors, can damage the stored data or disrupt shooting.
- Switch off the camera, remove the battery briefly, replace it, and switch the camera back on in case of a camera malfunction due to the effects of electromagnetic fields.
- Do not use the camera in the immediate vicinity of radio transmitters or high-voltage power lines. Their electromagnetic fields may also interfere with image recordings.
- Always store small parts, e.g., the accessory shoe cover, as follows:
- Out of the reach of children
- In a safe location, where they will not get lost or stolen
- State-of-the-art electronic components are sensitive to static discharge. You can easily pick up charges of several 10,000 volts by simply walking on synthetic floor coverings. A static discharge can occur when you touch the camera and especially if it is placed on a conductive surface. A static discharge on the camera housing poses no risk for the electronics. Despite built-in safety circuits, you should avoid direct contact with external camera contacts like those in the flash shoe.
- Take care not to soil or scratch the sensor for lens detection in the bayonet. You must similarly prevent direct contact of the bayonet with grains of sand or similar particles, as these could cause irreparable damage. This component must only be cleaned with a dry cloth (in system cameras).
- Use a cotton or linen cloth instead of a microfiber cloth from an optician's (synthetic) when cleaning the contacts. Make sure to discharge any electrostatic charge by deliberately touching a heating or water pipe (conductive, grounded material). Dirt deposits and oxidation on the contacts can be avoided by storing your camera in a dry location with the lens cap and the flash shoe/viewfinder cap (in system cameras) attached.
- Only use accessories specified for this model to prevent faults, short circuits or electric shock.
- Do not attempt to remove parts of the housing (covers) yourself. Repairs must be done at authorized service centers only.
- Protect the camera against contact with insect sprays and other aggressive chemicals. Petroleum spirit, thinner and alcohol must not be used for cleaning. Some chemicals and liquids can damage the camera housing or the surface finish.
- Rubber and plastics are known to expel aggressive chemicals and should therefore not be kept in contact with the camera for extended periods of time.
- Prevent any sand, dust, or water penetration into the camera, e.g., during snowfall or rain or on the beach. Be extra careful when changing the lens (in system cameras) and when inserting or removing the memory card and rechargeable battery. Sand and dust can damage the camera, the lens, the memory card, and the battery. Moisture can cause malfunctions and irreparable damage to the camera and memory card.
Lens
- A camera lens can have the effect of a magnifying glass when exposed to direct frontal sunlight. The camera must therefore be protected against extended exposure to direct sunlight.
- Attaching the lens cap and keeping the camera in the shade or ideally in its camera case will help prevent damage to the interior of the camera.
Rechargeable Battery
- Improper use of the batteries or the use of unapproved battery types may result in an explosion!
- Do not expose the rechargeable battery to sunlight, heat, humidity or moisture for prolonged periods of time. Likewise, the batteries must not be placed in a microwave oven or a high-pressure container as this would pose a fire or explosion hazard!
- Do not under any circumstances charge or insert a damp or wet battery into the camera!
- A safety valve in the battery ensures that any excess pressure caused by improper handling is discharged safely. It is nevertheless important to dispose of a bloated battery immediately. It may pose an explosion hazard!
- Keep the battery contacts clean and easily accessible. Although lithium-ion batteries are secured against short circuits, they should still be protected against contact with metal objects like paper clips or jewelry. A short-circuited battery can get very hot and cause severe burns.
- When a battery is accidentally dropped, make sure to check the housing and the contacts immediately for any damage. A damaged battery can damage the camera.
- The battery must be removed from the camera or charger and must be replaced immediately in case of a strange smell, discoloration, deformation, overheating or leakage. Continued use of the battery may result in overheating, which can cause fire and/or explosion!
- Never throw batteries into a fire as they may explode.
- Keep the battery away from sources of heat in case of leakage or if you smell burning. Leaked fluid can catch fire!
- The use of other chargers not approved by Leica Camera AG can cause damage to the batteries – and in extreme cases – cause serious or life-threatening injuries.
- Make sure that the power socket is freely accessible at all times.
- Do not attempt to open the battery or the charger. Repairs must only be carried out by authorized service centers.
- Keep batteries out of the reach of children. Batteries can cause suffocation when swallowed.
First Aid
- Battery fluid may cause blindness if it comes into contact with the eyes. Rinse the eyes thoroughly with clean water immediately. Avoid rubbing. Seek medical attention immediately.
- Leaked battery fluid poses an injury hazard when it comes in contact with clothing or skin. Rinse the affected areas thoroughly with clean water.
Charger
- Using the charger in the vicinity of broadcasting receivers may interfere with reception. Ensure a distance of at least 1 m between the charger and the receiver.
- When the charger is in use, it may emit a buzzing sound – that is normal and not a malfunction.
- Disconnect the charger from the mains when it is not in use, as it consumes electricity (a very small amount), even if no battery is inserted.
- Always keep the charger contacts clean, and never short-circuit them.
Memory Card
- Never remove the memory card during a data save or card reading process. The camera must not be switched off or be subjected to impact or vibrations while working.
- Do not open the cover or remove the memory card or the battery from the camera while the status LED is lit, which indicates memory access. Data on the card may otherwise be destroyed and camera malfunctions may occur.
- Do not drop or bend memory cards as this will cause damage and result in the loss of stored data.
- Do not touch the connections on the reverse of the memory card and keep them clean and dry.
- Keep memory cards out of the reach of children. Swallowing a memory card may cause suffocation.
Sensor
- Cosmic radiation (e.g., during flights) may cause pixel defects.
Carry Strap
- Carry straps are usually made of very robust material. You should therefore keep it out of the reach of children. A carry strap is not a toy and poses a strangulation risk.
- Use the carry strap only for its intended purpose on a camera or on binoculars. Any other use poses the risk of injury and may possibly result in damage to the carry strap and is therefore not permitted.
- Carry straps should also not be used for cameras/binoculars during sports activities that pose a risk of entanglement (e.g., when mountain climbing and similar outdoor activities).
Tripod
- When using a tripod, make sure it is standing securely and turn the camera only by turning the tripod, not the actual camera.
- Ensure that the tripod screw is hand-tightened only.
- Avoid transporting the camera while the tripod is attached. You might injure yourself or others and the camera could get damaged.
Flash
- The use of incompatible flash units with your Leica Q2 may result in irreparable damage to the camera and/or the flash unit.
Compatible with Leica FOTOS App
Leica FOTOS ist als eine universelle App für iPhone, iPad und ebenfalls für Android-Geräte verfügbar. Verbinden Sie Ihre Leica Kamera und übertragen, betrachten, bearbeiten und teilen Sie Ihre Fotos. Nutzen Sie die nahtlose Integration von Adobe Lightroom auf iOS und iPadOS für Ihren mobilen Workflow bis hin zur professionellen Bearbeitung Ihrer Bilder.
Jetzt registrieren und die Garantie verlängern
Mit der Registrierung im Leica Account können Sie die Garantie auf Ihr Leica Produkt um weitere 12 Monate verlängern.